Category: Audio Products
Published: Thursday, 29 October 2020
Written by Richard Hoogeveen

2 way loudspeaker VISE

 

This is the 2 way loudspeaker set designed by Jan Mulder (Dalojan) and adopted by HMR-audio. A small loudspeaker but absolutely great in sound. The VISE, as we call it, can be placed on a bookshelf or on a stand. Jan did a great job in designing the enclosure in AJHorn and filter in BoxSim. The choice was made for a Visaton woofer and Seas tweeter. The enclosure has a small transmission line.

The loudspeakers sound fantastic, instruments clearly in detail and voices really come forward.

The low is incredible for such small loudspeakers and just below 40Hz. The below sets have surprised many in the audio community, one of the reasons to keep this design of Jan.

 

Visaton AL-130, Seas 29TFF

15mm biscuit glued MDF, inner sides covered with butyl compound damping

Filter with Jantzen and Mundorf parts

Filling 25 grams Twaron, Sonofil

7.6 kg each

20 x 30cm front, 30cm depth

35-25.000Hz / 8 Ohm

Crossover at 2kHz

Handcrafted by HMR-audio

 

 

If you are interested in listening to a set or buying a set, please fill in the contact form.

Category: Audio Products
Published: Thursday, 29 October 2020
Written by Richard Hoogeveen

MM / MC RIAA PreAmp PHOLIX

 

 Made with great precision. Simulated and well tested with the CLIO measuring device I have. Very low distortion numbers, well below 0.004% THD.

The PHOLIX can run in the PRELUX as an add-on printed circuit board to support a PHONO input. It sounded absolutely wonderful with my Marantz 6150 and MM Ortofon 2M Red.

The new HMR-Audio version V2.0 is ready !

When you look carefully you see that the board can also run as a standalone PHONO preamp called PHOLIX.

It is built with great care and every Wima capacitor is matched between the L and R channel.

Since 2021 you will have the HMR-Audio MM / MC PHOLIX Phono preamp (46dB/66dB) in a distinctive HMR-Audio CNC full aluminum 6082 casing.

The CNC is also done at HMR-Audio.

 

 

 

 

The Pholix can be made for available for you in any form (populated board, as add-on in PRELUX or standalone), you can contact me with the contact form.

The measured RIAA correction curve.

 

 

Category: Audio Products
Published: Monday, 26 October 2020
Written by Richard Hoogeveen
Category: Audio Products
Published: Wednesday, 28 October 2020
Written by Richard Hoogeveen

RC-5 Remote Control RELUX

 

This remote control is fully CNC handcrafted by HMR-Audio.

Its weight is around 300gr of pure aluminum. 

It is available for PRELUX, the preamp of HMR-Audio.

On request each button can be programmed to any button and device channel from the RC-5 table.

The RELUX normally does not have any characters engraved for the buttons, you just need to remember them !

If you want them anyway, you can get them ;-)

 

RELUX

This remote can be made for you or you can buy the PCB and handwire the RC-5 yourself, you can contact me with the contact form.

 

Category: Audio Products
Published: Monday, 26 October 2020
Written by Richard Hoogeveen

UltraLinear EL84 Tube amplifier ELUX

 

It took a while, but finally it is here, designed by HMR-Audio and I used idea's of Jan, made some changes and used my digital experience and CNC art.

 It is an ultralinear EL84 Amplifier in Class A and its name is ELUX. Everything that you see from CNC to PCB layouts is made by HMR-audio. Like SELiiX it has a controller that keeps track of currents, audio detection, high voltages, keeps track of hours and uses a touch panel to control the amplifier and settings. It has one very unique feature, when you turn ELUX on, the lid on top opens to uncover the tubes and let the heat dissipate into the air.

MORE INFORMATION WILL FOLLOW SOON !